Kerby – The best Driveway Ramp Solution for new subdivisions and curbs that are too high

The Best Driveway Ramp that’s super-strong, simple & effective – Meet Kerby.

The Best Driveway Ramp (Kerby) - Kirby Before & After Driveway Ramp Kerb Ramps Curb Ramps Rubber Ramp Rolled Back Curb Ramps for lowered cars car ramps better than tread plate

The Best Driveway Ramp (Kerby) is the best way to stop your wheels going out of alignment!

The Best Driveway Ramp (Kerby) was designed right here in Rolleston by ISL as he had ‘had enough’ of that “bump” every time he went in or out of his driveway.

 

The Best Driveway Ramp (Kerby) is a simple and effective solution to the problem of the deep or shallow gutters in new subdivisions, the ramp bolts into the gutter and lets the water flow underneath.

The Best Access Ramp is the solution!

The Best Driveway Ramp (Kerby) is a super-strong Aluminium ramp that bolts (or screws) into the gutter with 10mm galvanised dyna-bolts (or concrete screws) to provide a smoother transition over the curb/gutter. So no more bumping, no more grinding the front off you and your friends cars and no more bouncing the trailer over the curb. The Best Driveway Ramp (Kerby) is superior to tread-plate folded ramps that can rust and bend. Kerby, The Best Driveway Ramps are in my opinion the best looking option and come in 3.0, 2.0 & 1.0 meter DIY lengths.

NB: SMALLER OR CUSTOM-CUT LENGTHS CAN BE PURCHASED TO MAKE UP THE BALANCE OF THE WIDTH OF THE DRIVEWAY ENTRANCE BUT GENERALLY COME IN INCREMENTS OF 1M LENGTHS.

We have spoken to the Selwyn Council regarding these ramps and at the time they appear to have no issues as long as it doesn’t prevent them performing maintenance on the gutter (as in covering a manhole or drain).

THE DIY PRICE DOES NOT INCLUDE INSTALLATION AS THIS CAN BE DONE IN MANY WAYS AND IS A BIT OF A VARIABLE DEPENDING WHERE YOU LIVE*. PLEASE SEE SPECS & PRICING BELOW.

For viewing the product in situation there are samples in West Melton, Prebbleton and Rolleston.

For DIY, Contact Clint on clint@xclint.com or txt/ring 021 1144014 for more information.

Car bottoming out?

These heavy duty Aluminium driveway ramps, gutter ramps, curb ramps or kerb ramps or whatever you want to call them are designed to solve many problems, like eliminating ‘the bump’ as you drive in and out, stopping trailer noise, and saving your expensive wheel alignment, in turn saving your tyres.
Council compliant but you need to double-check with the developer of your subdivision as there may be covenants etc.

Contact Clint on clint@xclint.com or txt/ring 021 1144014 for more information.

Hover to zoom | Click to enlarge

The Best Driveway Ramp (Kerby) Measurements for the Aluminium Extrusion is 5mm thick all round. Total width is 110mm (base closest to the curb is offset by 10mm at the bottom of the extrusion (the base) which is 100mm as we look at the sketch), by 50mm high/tall.
The Best Driveway Ramp (Kerby) Measurements for the Aluminium Extrusion is 5mm thick all round. Total width is 110mm (base closest to the curb is offset by 10mm at the bottom of the extrusion (the base) which is 100mm as we look at the sketch), by 50mm high/tall.

Viewing samples | Installation | Current pricing (subject to change) | Supply NZ-WIDE

VIEWING SAMPLES
24 Sheridan Drive, Rolleston is where you can view a 9m installation, or collect the product from (by appointment).

INSTALLATION
No holes are drilled in a “Clean” length or section.
However, I can “Pre-Drill” them or “Install” them if required.
I just need to know how many holes and what the dyna-bolts/concrete screws are going into, and the address and length(s) required etc.
NB: I have to cut up straight lengths into sections to get around acute convex or concave curves (which is more material, cutting and fixing costs).

PRICING
Each 3m Clean length is $245+GST.
Each 2m Clean section that is cut to size is $170+GST/m.
Each 1m Clean section that is cut to size is $85+GST/m.

Each 3m Pre-Drilled length is $275+GST.
Each 2m Pre-Drilled section that is cut to size is $200+GST/m.
Each 1m Pre-Drilled section that is cut to size is $100+GST/m.

Each 3m Installed* length is $375+GST.
Each 2m Installed* section that is cut to size is $250+GST/m.
Each 1m Installed* section that is cut to size is $125+GST/m.

*Currently “Installation” areas are mainly Christchurch & Selwyn Urban areas only, Waimakariri (including Pegasus), Rural and the wider Canterbury area incur a call-out fee starting at $50.

We can supply New Zealand wide.
Example freight costs for one (up to 3m, 10kg or less) length are…
Christchurch to Auckland estimated freight is $70+GST.
Christchurch to Tauranga estimated freight is $85+GST.
NB: Freight costs are calculated on your actual address.

All prices are +GST and are subject to change and freight/shipping costs.

Kerby the best driveway ramp is sooooo strong, we had an 18T Truck & Container on top it witout it flinching!

KERBY the strongest driveway ramp and can be used for trucks and trailers. Here's KERBY driveway ramp with an 18T Truck & extra container on top. This image tells more than 1000 words!